InstinoxInstinoxInstinoxInstinox
  • Home
  • About Us
  • Products
    • Pipe Fittings
    • Tube-Fittings
    • Steel Pipes
    • Steel Tubing
    • Flanges
    • Steel Sheets
    • Steel Plates
    • Fasteners
    • Steel Bar
    • Valves
  • Contact

Outlets

  • 904L Pipe Fittings
  • Duplex Stainless Steel Pipe Fittings
    • Duplex Stainless Steel Weldolet
    • Duplex Stainless Steel Sockolet
  • Carbon Steel Pipe Fittings
    • Carbon Steel Socket Weld Fittings
      • Carbon Steel Tees
      • Carbon Steel Elbow
      • Carbon Steel Pipe Nipple
      • Carbon Steel Swage Nipple
    • Carbon Steel Sockolet
    • Carbon Steel Weldolet
    • Carbon Steel Threadolet
  • Inconel Pipe Fittings
    • Inconel 625 Pipe Fittings
      • Inconel 625 Weldolets
      • Inconel 625 Sockolets
      • Inconel 625 Threadolets
      • Inconel 625 Butt Weld Fittings
        • Inconel 625 Stub End
        • Inconel 625 Concentric Reducers
        • Inconel 625 Eccentric Reducers
      • Inconel 625 Socket Weld Fittings
        • Inconel 625 Tee
        • Inconel 625 Elbow
        • Inconel 625 Pipe Nipple
        • Inconel 625 Swage Nipple
    • Inconel 600 Pipe Fittings
      • Inconel 600 Weldolets
      • Inconel 600 Sockolets
      • Inconel 600 Butt Weld Fittings
        • Inconel 600 Eccentric Reducers
        • Inconel 600 Stub End
        • Inconel 600 Concentric Reducers
      • Inconel 600 Socket Weld Fittings
        • Inconel 600 Tee
        • Inconel 600 Elbow
        • Inconel 600 Pipe Nipple
        • Inconel 600 Swage Nipple
    • Inconel Sockolets
    • Inconel Threadolets
    • Inconel Weldolets
  • Hastelloy Pipe Fittings
    • Hastelloy C22 Pipe Fittings
      • Hastelloy C22 Weldolets
      • Hastelloy C22 Sockolets
      • Hastelloy C22 Butt Weld Fittings
        • Hastelloy C22 Stub End
        • Hastelloy c22 concentric reducers
        • Hastelloy C22 Eccentric Reducers
      • Hastelloy C22 Socket Weld Fittings
        • Hastelloy C22 Tee
        • Hastelloy C22 Elbow
        • Hastelloy C22 Pipe Nipple
        • Hastelloy C22 Swage Nipple
    • Hastelloy Weldolets
    • Hastelloy Sockolets
    • Hastelloy C276 Pipe Fittings
      • Hastelloy C276 Butt Weld Fittings
        • Hastelloy C276 Stub End
        • Hastelloy c276 Concentric Reducers
        • Hastelloy C276 Eccentric Reducers
      • Hastelloy C276 Socket Weld Fittings
        • Hastelloy C276 Tee
        • Hastelloy C276 Elbow
        • Hastelloy C276 Pipe Nipple
  • Monel Pipe Fittings
    • Monel 400 Pipe Fittings
      • Monel 400 Weldolet
      • Monel 400 Sockolet
      • Monel 400 Threadolet
      • Monel 400 Butt Weld Fittings
        • Monel 400 Stub End
        • Monel 400 Concentric Reducers
        • Monel 400 Eccentric Reducers
      • Monel 400 Socket Weld Fittings
        • Monel 400 Tee
        • Monel 400 Elbow
        • Monel 400 Pipe Nipple
    • Monel Weldolet
    • Monel Sockolet
    • Monel Threadolet
  • Titanium Pipe Fittings
    • Titanium Weldolet
    • Titanium Sockolet
    • Titanium Socket Weld Fittings
      • Titanium Tee
      • Titanium Elbow
      • Titanium Pipe Nipple
      • Titanium Swage Nipple
    • Titanium Butt Weld Fittings
      • Titanium Stub End
      • Titanium Concentric Reducers
      • Titanium Eccentric Reducers
  • Super Duplex Pipe Fittings
    • Super Duplex 2507 Steel Weldolet
    • Super Duplex 2507 Steel Sockolet
  • Stainless Steel Pipe Fittings
    • Stainless Steel Weldolet
    • Stainless Steel Sockolet
    • Stainless Steel Threadolet
    • Stainless Steel 304 Pipe Fittings
      • Stainless Steel 304 Socket Weld Fittings
        • Stainless steel 304 Tee
        • Stainless Steel 304 Elbow
        • Stainless steel 304 Pipe nipple
      • Stainless Steel 304 Butt Weld Fittings
        • Stainless Steel 304 Stub End
        • Stainless Steel 304 Concentric Reducers
        • Stainless steel 304 Eccentric Reducers
    • Stainless Steel 316 Pipe Fittings
      • Stainless Steel 316 Socket Weld Fittings
        • Stainless Steel 316 Tee
        • Stainless Steel 316 Elbow
        • Stainless steel 316 Pipe Nipple
        • Stainless Steel 316 Coupling
      • Stainless Steel 316 Butt Weld Fittings
        • Stainless steel 316 Concentric Reducers
        • Stainless steel 316 Eccentric Reducers
        • Stainless Steel 316 Stub End
  • Butt Weld Fittings
    • Stainless Steel Butt Weld Fittings
      • Stainless Steel Stub End
      • Stainless Steel Concentric Reducers
      • Stainless Steel Eccentric Reducers
    • 45 Degree Elbow
    • 90 Degree Elbow
    • Concentric Reducer
    • Equal Tee
    • Reducing Tee
    • Equal Cross
    • Eccentric Reducer
    • End Cap
    • U Bend
    • Stub End
    • Carbon Steel Butt Weld Fittings
      • Carbon Steel Stub End
      • Carbon Steel Concentric Reducers
      • Carbon steel Eccentric Reducers
    • 180 Degree Elbow
    • Custom Radius Pipe Bends
    • Reducing Cross
    • 1D Elbow
    • Collar
    • Short Pattern Stub End
    • 3D Elbow
    • 5D Elbow
    • Alloy Steel Butt Weld Fittings
    • Monel Butt Weld Fittings
      • Monel Stub End
      • Monel Concentric Reducers
      • Monel Eccentric Reducers
    • Hastelloy Butt Weld Fittings
      • Hastelloy Stub End
      • Hastelloy concentric reducers
      • Hastelloy Eccentric Reducers
    • Inconel Butt Weld Fittings
      • Inconel Stub End
      • Inconel Concentric Reducers
      • Inconel Eccentric Reducers
    • Duplex Butt Weld Fittings
      • Duplex Stainless Steel Stub End
      • Duplex Stainless Steel Concentric Reducers
      • Duplex Stainless Steel Eccentric Reducers
    • Super Duplex Butt Weld Fittings
      • Super Duplex 2507 Stub End
      • Super Duplex 2507 Concentric Reducers
      • Super Duplex 2507 Eccentric Reducers
    • SS 904L Butt Weld Fittings
    • Straight Tee
  • Socket Weld Fittings
    • Full Coupling
    • Half Coupling
    • Tee
    • Nipple
    • Socket Weld Elbow
    • Socket Weld End Cap
    • Socket Weld Cross
    • Socket Weld Lateral
    • Socket Weld Union
    • Socket Weld Reducer Insert
    • Swage Nipple
    • Stainless Steel Socket Weld Fittings
      • Stainless Steel Tee
      • Stainless Steel Elbow
      • Stainless Steel Pipe Nipple
      • Stainless Steel Swage Nipple
    • Alloy Steel Socket Weld Fittings
    • Inconel Socket Weld Fittings
      • Inconel tee
      • Inconel Elbow
      • Inconel Pipe Nipple
      • Inconel Swage Nipple
    • Hastelloy Socket Weld Fittings
      • Hastelloy Tee
      • Hastelloy Elbow
      • Hastelloy Pipe Nipple
      • Hastelloy Swage Nipple
    • Monel Socket Weld Fittings
      • Monel Tee
      • Monel Elbow
      • Monel Pipe Nipple
      • Monel Swage Nipple
    • Duplex Socket Weld Fittings
      • Duplex Stainless Steel Elbow
      • Duplex Stainless Steel Tee
      • Duplex Stainless Steel Pipe Nipple
      • Duplex Stainless Steel Swage Nipple
    • Super Duplex Socket Weld Fittings
      • Super Duplex 2507 Tee
      • Super Duplex 2507 Elbow
      • Super Duplex 2507 Pipe Nipple
      • Super Duplex 2507 Swage Nipple
    • SS 904L Socket Weld Fittings
    • Socket Weld End Cap
  • Outlets
    • Sockolet
    • Sweepolet
    • Threadolet
    • Weldolet
    • Brazolet
    • Coupolet
    • Latrolet
    • Nipolet
      • Stainless Steel 316 Nipolet
      • Monel 400 Nipolet
      • Duplex Stainless Steel Nipolet
      • Inconel Nipolet
      • Inconel 600 Nipolet
  • Duplex 2205 Pipe Fittings
    • Duplex 2205 Steel Weldolet
    • Duplex 2205 Steel Sockolet
    • Duplex 2205 Butt Weld Fittings
      • Duplex 2205 Stub End
      • Duplex 2205 Concentric Reducers
      • Duplex 2205 Eccentric Reducers
    • Duplex 2205 Socket Weld Fittings
      • Duplex 2205 Tee
      • Duplex 2205 Elbow
      • Duplex 2205 Pipe Nipple
      • Duplex 2205 Swage Nipple
Home Pipe Fittings Outlets

OUTLETS MANUFACTURERS & SUPPLIERS

Instinox is a producer and a particular supplier of Olets, also called Outlets. Instinox goes for winning clients hearts over fiscal qualities. We stock more than 1200 tonnes of outlets. Every one of our exercises is guided towards consumer loyalty. We intend to convey first conveyance model, which accommodates quick dispatch consequently of the receipt of bank exchange duplicate. The client does not need to hold up to get the products after that. We stay away from neck delays at each stage. For us, consumer loyalty is the above all which must be taken amid all businesses. Our clients trust us in light of the fabulous products quality and fantastic products that are tough and manageable.
Instinox in the previous two decades has a record of under 1% merchandise return rate. Each one of our products has brand checking and distinguishing proof. Instinox likewise does modify making according to client prerequisites. Our connection’s products experience government and private research facility testing before being supplied to our clients. We give after deals backing and administration to keep up client relations. The Instinox purchasing background is world class and this significantly keeps our clients devoted towards our image. We at Instinox, dispose of issues that clients face when purchasing from other organisations. Dimensions about products quality or principles of materials never let down our firm. Numerous little firms confront the issue of non-accessibility while Instinox never misses the mark concerning clients’ requests. We likewise exceed expectations at executing both little and mass size order requests. We give same day delivery to our customers on urgent requirements.

ABOUT OUTLETS

Outlet fittings are designed to be welded onto an existing “run” of pipe to give a branch or “outlet” connection without cutting run pipe. The connections can be strong, attachment weld, braze or butt-weld. Outlet fittings give 90˚ or 45˚ (elbow) connections and are regularly depicted by two sizes.An outlet is a generic term for all branch sort connections. They can accompany strong attachment weld and butt weld end connections. The most widely recognised sports are utilised as a part of a spot of a tee. An opening is cut in the side of the pipe, the outlet is welded set up over the gap and after that, the extra length of the channel is appended to the outlet. The run or header size refers to the channel on which the outlet is mounted. The outlet or branch size refers to the length of a pipe diverging the run. At times the run size is given as a conceivable reach or union. This implies the outlet can be utilised on a few distinctive pipe sizes. The outlets must be designed for reinforcement of the opening and to restore the header pipe to its original strength.

SEND US YOUR REQUIREMENTS NOW

CONTACT US

BRIEF DESCRIPTION

The outlets is the kind of fitting used to make a branch with the littler size of the main pipe. Outlets normally utilised as a part of piping with high weight and temperature where the association with the joint type butt weld.

TYPES OF OUTLETS

  • Weldolet
  • Sweepolet
  • Sockolet
  • Threadolet
  • Latrolet
  • Nipolet
  • Flexolet
  • Couples
  • Brazolet
  • Insert Weldolet

MAJOR APPLICATIONS

  • Preparing plant for sulphuric, phosphoric and acidic acids
  • Pulp and paper processing
  • Components in gas scouring plants
  • Seawater cooling gear and equipment
  • Oil refinery industries
  • Wires in electrostatic precipitators

FEATURES

  • Meets ASTM Standards
  • Heavy Gage Steel
  • Quick Installation
  • Durable and Reliable
  • No Concrete Cracking
  • Self-Leveling
  • Self-Aligning
  • No Cutting of Forms
  • No Misaligned Pipe

TESTS

At Instinox for customer’s satisfaction and to keep up to the name earned by our company, we conduct various destructive and nondestructive tests. Conducting tests on our product helps us know our product in a better way. Many tests like positive material identification (PMI) tests, chemical analysis tests, hardness test, micro test, flaring test, flattening test, hydrostatic test, radiography test, eddy current

SPECIFICATIONS

  • Outlet fitting measurements adjust to ASME and ASTM standards.
  • Outlet fitting measurements recorded are either essential or set by the factory per ASME standards contact SCI for precise dimensional data.
  • NPT strings on fashioned outlet fittings adjust to ASME standards.
  • Outlet attachment weld embeds adjust to MSS-SP-79
  • Outlet unions adjust to MSS-SP-83 and MSS-SP-97
  • Manufacturing standards follow ISO 9001:2008.

PRICING

We offer our products at customer-friendly prices which do not actually include the type of product the customer will buy. Although the prices of the outlets will vary according to the particular element used for making the outlets and also depending upon its specifications and its effective properties.

MARKING

The products shipped from Instinox will have complete marking details. These details are in accordance with the test certificate we supply. In the case of orders for a cut piece of Pipes, Sheets or Round Bars, the marking is transferred from the product from which it is cut. In such cases, we provide Letter confirming the marking transfer and picture of the product from which it is cut.

VALUE ADDITION

At Instinox you get stock options with shortest manufacturing time. If you contact us, we assure you a response within 24 hours. Instinox aims at 100% fulfilment of commitments. We don’t give false assurance. This helps us in maintaining good relations with our customers. It is advisable that you let us do the shipping process as it is cost-effective as well as efficient. The product we supply comes with full traceability made of genuine raw materials. The raw material is selected as per your requirements at the minimum price possible.

LOGISTICS

We offer price basis depending on your requirements. It can be based on previous works, FOB, Nhava, Sheva, CFR, CIF and CPT your destination port or your door to door delivery duty which can be paid or unpaid.

outlets

PRODUCTION OF OUTLETS

We have a state of the art mill facilities access which runs at a full capacity due to export order overload. We have 3 heavy punch machines for making seamless tees. We also have bend machines for elbows and equipment for reducer. We have facilities to make seamless pipe fittings up to 8” We can make welded pipe fittings manufacturers upto 42”. We also have threads in NPT, BSPT & BSPP to make forged fittings. The dye of socket weld fitting is outsourced and machining and finishing is done in house. Added to that we have in house testing facilities like spectro machine, PMI Machine, Mechanical test, Hardness Test, Ultrasonic Testing, Hydrostatic Testing, Pressure testing, and manual inspection of gauge. Our production range also includes flanges and fasteners which are considered piping accessories for a pipeline set up.

QUALITY

Quality control is the main priority at Instinox. Under quality system management of ISO 9001:2000, products are manufactured and all products are taken care of very seriously, no matter how bulk the quantity might be. Instinox is full of confidence to guarantee every fitting to be of the best quality before delivered to its customers. At Instinox, all fittings are subject to strict inspection and quality tests at all stages of the manufacturing process, from starting material purchasing to product dispatch. They are visually examined for conformity to ASTM, ASME, MSS, DIN, EN, and JIS codes and standards. At our requests, officially certified agencies are called to witness the material reports, dimension and quality conformity of products.Test Certificates are given to the manufacturer after third party inspection under the standards: EN 10204/3.1B, Raw materials Certificate, 100% Radiology Test report Test Certificate.

outlets
outlets

OUTLETS : BRAND

Our Outlets carry our brand identity with special brand marked on the fittings. Our brand i-Fit is branded on all pipe fittings exported from our company. i-Fit is a registered brand owned by Instinox which stand for intelligent fitting connections we provide for international markets. Use of intelligent technology modules is used for providing a seamless buying experience for high quality i-Fit pipefittings.

Pipe fittings manufactured are marked with standard format of i-FIT-Size-Material-Heat Number. This heat number is 100% traceable to our records and we maintain very strict watch to ensure the authenticity of our brand isn’t duplicated by other brands.

DOCUMENTATION OF OUTLETS

Instinox provides the certificate of origin legalised/attested by the chamber. Also, a commercial invoice including HS code is provided. Our product packing lists which come with the product includes a number of boxes, net weight and gross weight. We provide test certificate certifying NACE MRO103, NACE MR0175. Along with this, a raw material test report is provided as well. Our laboratory reports that are NABL approved also is provided to our loyal customers. Other reports like raw material reports, heat treatment charts and letter of guarantee is also provided by Instinox.

outlets

ONE MORE THING...

Fastest Delivery in the world.

At Instinox we target just one thing, the fastest seamless buying experience for our customers.

Whether small order or big order, we place a lot of emphasis on intelligent procurement modules. Real time inventory is maintained of all the available sizes in a house and in the market; so much time is spent on the manufacturing process and less on sourcing the raw material. Standard sizes are available in ready stock in Stainless Steel and Carbon Steel in our replenishing inventory system. All special grades are made to order. We undertake export orders irrespective of small or big quantities. We are the preferred choice of brand for urgent delivery and shut down projects due to our impeccable delivery system module. Added we have excellent storage and warehouse tracking facilities for quick dispatches and real-time stock tracking.

Thus we are the perfect choice for a requirement of outlets manufactured with world class quality and required on an urgent delivery basis.

Summary
product image
Author Rating
1star1star1star1star1star
Aggregate Rating
no rating based on 0 votes
Brand Name
Instinox
Product Name
Outlets
Price
USD 1-100
Product Availability
Pre-Order Only
oie_transparent-1 Copyright 2016-2017 | All Rights Reserved   Disclaimer
  • Home
  • About Us
  • Products
    • Pipe Fittings
    • Tube-Fittings
    • Steel Pipes
    • Steel Tubing
    • Flanges
    • Steel Sheets
    • Steel Plates
    • Fasteners
    • Steel Bar
    • Valves
  • Contact
Instinox