Stainless steel Ball Valves

INSTINOX, is a trusted Indian manufacturer and global distributors of top quality stainless steel ball valves. Here, we are constantly engaged in reviewing our processes, to become the supplier of choice, delivering top quality products and providing correct value to our customers in return for their resources. A continuous effort innovating new technologies, efficiency improvement, and prompt customer services. We also provide with customized packing, packaging according to the client needs and requirements.

These ball valves are responsible for throttling techniques i.e. they control the way in which the engine operates by controlling the power of the engine. The stainless steel ball valves, have excellent sealing capability. This makes them perfect for ceasing or commencing the flow, of the fluid. They are mainly used for gases and liquids as they are easy to turn on and off and have a tight sealing with low torque.
The stainless steel ball valves manufacturers , having the unique properties, are mostly considered in chemical industries. Applications in which consistent and limited flow is required, do require ball valves for their successful completion. Stainless steel ball valves are used especially when a consistent, measured, low flow rate must be uphold for some time, such as the stagnant fuel flow in a carburetor. Ball valves are used in changing the direction of the flow.
The aim here is to obtain a well-defined seat between two narrow joining surfaces, giving firm shutoff of the outflow from only a light float pressure. Since flow rates are less and many bends of the valve stem are required to fully open or close, ball valves are not used for simple shutoff applications. The force advantage of the fine threaded stem is more since the opening is narrow, ball valves are usually easy to shut off completely, with solely finger tight pressure. The spindle of a ball valve made from soft materials like Teflon, Neoprene and combinations of these given materials which does not make them preferable for high temperature industrial processes. Small simple ball valves are often used as bleed valves (hydraulic valves that combines one or more block/isolate valves,) in water-heating applications. It is easy to tell from examining the handle position and that the ball valve is opened or closed by examining the position of the valve.
As ball valves are made of soft materials, they are not suggested for extreme, high pressure industrial applications but considered the best for usage in oil and gas industry.

The stainless steel ball valves suppliers takes the surface heat spray coating with high velocity oxy fuel, where in the process starts when hydrogen and oxygen burn and explode with high velocity flame, the noise of which is generally triple the velocity of sound. We adopt thorough manual grinding mode for large-bore valves, it will maintain the quality of every valve.
The stainless steel ball valve uses a tapered (reduce in thickness towards one end) pin to slowly open up space for subtle control of flow. The flow can be controlled and regulated with the use of a spindle (a slender rounded rod with tapered ends). A quarter turn rotational motion valve is something which works in a round motion used for controlling the flow. The ball valves have a comparatively small opening with a round shaped ball valve (part of a device or mechanism that works with a plunging) on the end of a screw, which exactly fits the seat. As soon as the valve is turned and the plunger retracts, flow is possible between the seat and the plunger, however, until the plunger is completely retracted, the fluid flow is significantly impeded. Since it takes many spins of the fine threaded screw to retract the plunger, precise regulation of the flow rate is possible.
Ball valves may also be used in vacuum cleaner systems, when a specific control of gas flow is required, at low pressure, such as gas filled vacuum tubes, gas lasers and similar devices. We are our merchandisers, who have helped us in gaining advantage and a trusted name in the whole industry. Here, you just place the order, and we are there to look after the rest.

Our ball valves are wrapped in specialized carton wooden boxes with brand identity labelling. All the products are personally checked before packing. Then they are covered by plastic caps, to prevent damage during transit. All the bags are secured with a unique identification number, to ease the assembling process. We have an order tracking system, through these codes. We give emphasis on packaging as much as production, to provide our customers with seamless buying experience. Our skilled team, are our great strength for the trusted name we enjoy today.

At INSTINOX, we are accredited by renowned standardized standards, which includes ISO 9001:2008 etc. We enjoy global remarkable presence in many countries, due to our merchandisers. We believe in providing competitive but quite economical pricing to clients, and also we provide with same day shipping of goods against the receipt of purchase order. On customer request, we also provide with free samples. The customer just has the need to share their interest through our digital online link, and rest can be left to us.