Brass Needle Valves

Home Valves Needle Valves Brass Needle Valves

BRASS NEEDLE VALVES MANUFACTURERS & SUPPLIERS

At INSTINOX, we believe in the power of excellence- which is purely a result of commitment and strategy. We have been in the industry for more than a decade. Our processes have surely gained us the trust and fame that prevails now. We are the most popular Indian creators, suppliers and stockiest of brass needle valves. We are the only major source for small scale and medium scale industries with such huge stock selling. We believe in fulfilling the niche requirements of the clients. We are and will continue to be the trusted brand, and not stopping anytime in the future.

ABOUT BRASS NEEDLE VALVES

About brass:
Brass is a combination of different proportions of copper and zinc. This yellow coloured metal is corrosion resistant and preferable because it has higher malleability, and exhibits low friction. It is a good conductor of heat, which makes it preferable in high-temperature requirements. At instinox, we provide brass needle valves produced using the perfect proportion and process.

About needle valves:
In layman terms, a needle valve is an instrument which helps in controlling, deviating the flow of the liquid from the passageways. We, here at Instinox, have a precisely detailed strategy for manufacturing needle valves. A needle valve regulates the path from which the liquid should travel. It is a movable and a changeable option in a machine, mainly meant for change in direction. We can say that a needle valve is an equipment which deviates or differentiates the flow from its original path. It is the best option considered for obstructing the flow, way of the fluid.
Needle valves have a tapered opening at the other side making the fluid flow in a controlled, directed way. In addition, stainless steel 904l grade needle valves have an added advantage of highest durability than the other alloys. It allows precise regulation of the flow of fluid, although it is generally only able of relatively low flow rates. There is a volume control valve, which helps in controlling the pressure of the fluid flow. Needle valves have different openings at both the ends, designed mainly for controlling the flow of the liquid.
The loose material goes through the valve turns ninety degrees and then passes through an aperture that is the seat for a rod with cone shaped tip. An aperture is basically is an opening, just as in the case of the human body. The size of the opening is changed by locating the cone in alliance to the seat. Needle valves are more often used to control flow into damaged by the sudden direct flow of fluid under pressure. Needle valves are moreover used to control the closure of a work cycle, where it is covetable for a motion to be brought slowly to a halt and at other points where particular adjustments of flow are compulsory and where the rate of flow is expected to be slow. Instrumentation equipment and can be installed to control, equaliser, calibrate, measure, drain, isolate or vent (an opening that allows gas or liquid to pass out of or into a confined space) the pressure of gases and liquids. Instinox provides top quality brass needle valves in various styles, sizes, end connections and stem types. These brass needle valves are available in forged construction as well as bar stock. We have needle valves available, as per the specifications provided by the clients. We do customization in the packing and packaging, on the basis of the weather conditions and the modes of transportation. We provide packing in wooden boxes, not making it vulnerable to any outside threats.

SEND US YOUR REQUIREMENTS NOW

MANUFACTURING AND OPERATIONS

A brass needle valves manufacturers uses a tapered (reduce in thickness towards one end) pin to slowly open up space for subtle control of flow. The flow can be controlled and regulated with the use of a spindle (a slender rounded rod with tapered ends). A spindle is something which works in a round motion used for controlling the flow. A brass needle valve has a comparatively small opening with a long, tapered seat, and a needle-shaped plunger (part of a device or mechanism that works with a plunging) on the end of a screw, which exactly fits the seat. As soon as the screw is turned and the plunger retracts, flow is possible between the seat and the plunger, however, until the plunger is completely retracted, the fluid flow is significantly impeded. Since it takes many spins of the fine threaded screw to retract the plunger, precise regulation of the flow rate is possible.
The virtue of the needle valve is from the vernier (a vernier scale is a device that lets the user measure more precisely than it could be done unaided when reading a circular measurement scale) effect of the ratio between the needle’s length and its diameter, or the difference in diameter between needle and seat. A long travel axially (control input) makes for a very small and significant change radially (affecting the resultant flow). Needle valves may also be used in vacuum cleaner systems, when a specific control of gas flow is required, at low pressure, such as gas filled vacuum tubes, gas lasers and similar devices. We are our merchandisers, who have helped us in gaining the advantage and a trusted name in the whole industry. Here, you just place the order, and we are there to look after the rest.

FEATURES OF BRASS NEEDLE VALVES

100% percent in-house testing of goods.
Less than one percent rejection rate of our products.
Blunt tip in the stem.
Differential hardness between the strains.
Hardened stem and cold formed body threads.
The life cycle of the product is improved.
Choice of PTFE packing or Elastomeric O-ring
A reduced needle valve at the end.
Less than one percent rejection rate.
Inline and angle patterns.
Wide variety of US Customary and SI ports
Mountable panels.
Option for colour coded handles.

USES OF BRASS NEEDLE VALVES

Brass needle valves suppliers, having the unique properties, are mostly considered in chemical industries. Applications in which consistent and limited flow are required do require needle valves for their successful completion. Brass needle valves are used especially when a consistent, measured, low flow rate must be upheld for some time, such as the stagnant fuel flow in a carburettor. Needle valves are used in changing the direction of the flow.
Take to mind that the float valve of a carburettor (controls the fuel level within the carburettor) is not a needle valve, although it is described as one. It uses a blunt conical needle, but it seats against a square edged seat rather than a matching cone. The aim here is to obtain a well-defined set between two narrow joining surfaces, giving firm shutoff of the outflow from only a light float pressure. Since flow rates are less and many bends of the valve stem are required to fully open or close, needle valves are not used for simple shutoff applications.
The force advantage of the fine threaded stem is more since the opening is narrow, brass needle valves are usually easy to shut off completely, with solely finger tight pressure. The spindle of a needle valve made from brass, when shutting off the flow can be easily damaged by extra turning force. Small simple needle valves are often used as bleed valves (hydraulic valves that combine one or more block/isolate valves,) in water heating applications. It is not easy to tell from examining the handle position and check whether the valve is open or closed, unlike a ball valve or valves with a resting stem.

INSTINOX: ONE STOP SOLUTION FOR QUALITY BRASS NEEDLE VALVES

We believe that- to excel, it takes no rocket science, it just takes hard work and coordination. We are an ISO certified firm and have fulfilled all the other requirements, successfully. We are inclined towards attaining the majority share. We provide customised packing in wooden boxes and packaging according to the needs and requirements of the customers. Unlike the others, we also place a lot of emphasis on after sales services. Due to our high-quality standards, we have an overwhelming record of less than one percent rejection rate. We follow a hundred percent in house checking of goods, before taking it any further. High quality, defect free products using technology at its maximum, is surely a thing not indulged into by anyone from the whole industry.